Category Archives: Blackwork

Redwork Smock – things learned and changes made

I finally finished the first redwork sleeve for my smock.  After I posted it on FB, there were many questions that led to this more detailed post.  First things first, here is the first sleeve off the frame.

redwork and plaited gold braid sleeve number one

redwork and plaited gold braid sleeve number one

In the beginning this sleeve was not going to be embellished so was cut out.

  • Lesson learned:  don’t cut your piece out til you have embroidered it.  The first sleeve I had done a very small hem around 3 sides, this did not hold up so well when i was dressing the frame.
  • Lesson learned:  when drawing lines verify that your lines stay dark enough to see so you are able to follow the spacing.  As you can see the spacing is off due to lines “disappearing” during my embroidery.
  • Lesson learned: slow but steady wins the race… I learned to step away when I go frustrated with tangles or knots.  Pushing through usually meant taking out hours of work..
  • Lesson learned:  Be present.  This is a very difficult one as I am a squirrel and always want to do several things at once.  The more I immersed myself into this project the more I enjoyed the progress.

As I start the second sleeve I will try and walk through the process in more detail than was done with the first sleeve.

Remembering the difficulties I had lacing the frame with the small hem, I chose to increase the width of the hem and use two rows of running stitches with a back stitch about every 5 stitches.  This will hopefully create a more stable edge.  ( yes I forgot to take a picture)

Step number two is dressing the frame.  I am using a scroll frame as that is what I had available. The herringbone stitch is used to attach the upper and lower sleeve to the scroll frame.

Herringbone stitch

Herringbone stitch, this is the cuff end of the sleeve.

Once both upper and lower ends were secured, I was ready to start lacing the sides.  Button hole thread was the strong and easy to work with. Double strands were used where the space was larger and then decreased to a single strand as the lacing progressed up the sleeve.  I have tried various methods that do not take as much time to set up but this method seems to work the best for me.

full frame laced.

full frame laced.

And a close up of one side:

left side lacing

left side lacing

Ideally this would have been an uncut piece.  The lacing was a challenge that had to be approached carefully and slowly to create an even tension on the small hem..

Finally to start the redwork..

and the second sleeve begins

and the second sleeve begins

Part 2:  Duplicating the first sleeve pattern.  The first sleeve pattern was very much “messed up”  with the guidelines vanishing as the piece was worked on.  Working out a feasible way to create the same look with just measuring and counting threads will be an practice in patience.

Leave a comment

Filed under Blackwork, redwork smock

The Dreaded Plaited Braid Stitch

2015 has started!!!! With this thought I post the project that is on my desk at the beginning of this new year.. The Plaited Braid Stitch.. ( PBS)  This stitch has always been intimidating and for that reason,it has been kept on the back burner.  Not anymore, with Elizabethan Stitches by Jacqui Carey at my side, needle threaded, i conquered the stitch..

With the lower part of the sleeves redwork completed, it was time for the PBS.  With a deep breath I proceeded.  Following the instructions in Elizabethan Stiches, the PBS was started using DMC  Art 284, metallic thread.  The following pictures are of the completed piece so far.

front view

front view

Close up of back PBS

Close up of back PBS

Plaited Braid Stitch

Plaited Braid Stitch

Sleeve off scroll frame.

Sleeve off scroll frame.

As this new year starts with a rush, remember to create and inspire!!! Thank you all for the support and comments as this blog moves forward.. May we have a wonderful year creating, sharing and learning together..

4 Comments

January 1, 2015 · 9:51 am

Cup Cover Finished

It was done a few days ago however, with the holidays have not had time to sit down to up load the pictures.  It is a 10 inch square which is perfect for my chalice but a tad big for my mug.. 
finished cup cover

finished cup cover

 
 
 
middle of cup cover

Middle of cup cover

 
As this cup cover evolved, so did the design.  At first, there was only going to be blackwork on the top.  This changed as the hem was put in.  It needed the corners… Also the acorns that I had on hand did not have the weight that I needed.  Pulling out my jewelry making supplies and foraging resulted in the finished corners.
Supplies needed for corner weights

Supplies needed for corner weights

Finished corner pieces

Finished corner pieces

The acorns were attached securely and reinforced.

close up of corner

close up of corner

This is now in my basket ready for the next event..

Leave a comment

December 17, 2013 · 1:24 pm

Sneak peak at cup cover….

One corner finished.  Here is a sneak peak on the project.  
 
sneak peak of progress
 
 
Enjoy!!!

3 Comments

December 8, 2013 · 5:56 am

Carry Along Project

Looking at the pile of project ideas there was an empty bag  to filll with a project.  This bag is always filled with small projects to  work on in the odd free moments of my day.  The next step in my smock is working on the sleeves that are larger pieces so it will not work as a Carry Along Project.   Cup covers have always been something lacking in my basket.. Hmmm   guess this would be a good start.. Finding a pattern was easy..

pattern for cup cover 12.2013

As you can see ACORNS…  Then, while digging in the stash that has accumulated, several linen napkins tumbled out of the the pile.  Perfect!!!!   Silk, what colors are hanging out in the basket… purple and green.. the evening gets better and better.. off to start.. cleaning can wait til tomorrow.. 
 
Here is a sneak peak of the colors!!!
purple and green progress here is the project:  Linen napkin, purple and green silk over 2 threads.. 
 
 
 

Leave a comment

Filed under Blackwork